Italiano
English
Deutsch
Français
Español
Recommendations for reaming
On this page, you will find some general recommendations for your workshop with our reamers and floating holders. Please do not hesitate to contact us for more informations.
| Werkstoff Matière Material |
Härte Résistance Hardness (N/mm2) |
Reibahlen Alésoirs Reamers Ø (mm) |
Schnittgeschwindigkeit Vitesses de coupe Cutting speed v=(m/min) |
Vorschub * Avance * Feed * f=(mm/U) |
Spantiefe Matière à enlever Depth of cut (mm/Ø) |
||||||
| HSS-E | ACUREA | HM/CAR | HSS-E | ACUREA | HM/CAR | HSS-E | ACUREA | HM/CAR | |||
| Stähle, Stahlguss Aciers, Fonte Steels, Cast steel |
400-800 | 1 - 3 | 8 - 12 | 20 - 40 | 15 -25 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | |||||||||
| Stahl-Legierungen Aciers alliés Steels alloyed |
800-1200 | 1 - 3 | 4 - 8 | 15 - 30 | 8 - 15 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | |||||||||
| Grauguss Fonte grise Cast iron |
200 | 1 - 3 | 6 - 10 | 20 - 30 | 10 - 20 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | |||||||||
| Titan-Legierungen Titane, alliages de Titan, Alloyed |
900-1200 | 1 - 3 | 10 - 15 | 20 - 40 | 15 - 20 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.2 - 0.4 mm | 0.2 - 0.4 mm | |||||||||
| Kupfer-Legierungen Cuivre alliés Copper alloyed |
350-700 | 1 - 3 | 8 - 12 | 20 - 40 | 15 - 20 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.3 - 0.5 mm | |||||||||
| Aluminium | 350-500 | 1 - 3 | 10 - 20 | 30 - 50 | 20 - 30 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.2 - 0.4 mm | 0.2 - 0.4 mm | |||||||||
| Messing-Legierungen Laiton alliages Brass alloyed |
1 - 3 | 10 - 12 | 25 - 50 | 20 - 25 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | |||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.3 - 0.5 mm | |||||||||
| Kunstoff Plastiques Plastics |
1 - 3 | 4 - 10 | 20 - 40 | 10 - 20 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | |||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | |||||||||
| 10-20 | 0.3 - 0.5 mm | 0.3 - 0.5 mm | |||||||||
| Drehzahl Tours Speed |
n=U/min. | mit Pendelhalter avec mandrin flottant with floating holder |
n = 2000 - 300 U/min. | ||||||||
| * Vorschub * Avance * Feed |
f=mm/U | je härter der Werkstoff plus dur le matériel the harder the material |
f = minus f = moins f = less |
je weicher der Werkstoff plus doux le matériel the softer the material |
f = mehr f = plus f = more |
||||||
| Rücklauf der Reibahle Retrait de l'alésoir Return fee |
Eilgang à vitesse accélérée speed |
||||||||||
| Kühlmittel Réfrigérant Coolant |
Schneidöl / Emulsion 1:10 Huiles de coupe / émulsion 1:10 oil / soluble 1:10 |
auch mit Innenkühlung aussi avec refroidissement intérieur also with through coolant |
10 - 40 Bar | ||||||||